Đồng hồ đo độ dày vật liệu SM-114 Teclock

Xuất xứ:
Japan
Tình trạng:
Mới 100%
Bảo hành:
12 tháng
Chia sẻ:
Số lượng
Yêu cầu gọi lại
số điện thoại

Thickness Gauge

sm-114 teclock.jpg

Dial Indicator is used by being fitted to jig etc., while thickness gauge is held with our hand. Holding work piece between stylus and anvil, read the value directly. Contact point moves to upward when lifting lever is pressed down, and contact point returns to “zero” when it is released. As operation is easy, it can measure for a short period compared with micrometer. There are 2 kinds of Dial 0.01mm , 0.001mm for both analog and digital. The stroke depends on size of work piece and a model is available to measure maximum thickness up to 50mm. This can be used for various thickness measurement such as paper, hair, rubber plate metal tube small molded components.

  • Suitable for measuring thickness and diameter of metal, lens, rubber, plastic, paper, felt, hair, pearl etc. in actual dimension.
  • Ceramic contact point and anvil feature are superior for anti-abrasion and rust. In addition, there are steel FE type and AT type which rarely adheres with adhesion tape.
  • As to shape of contact point and anvil, there are standard type and other various kinds.
  • Measuring force of standard type is not more than 2.5N as final pressure, low measuring force type of which final pressure is about 0.4N (about 40gf) is also available.

 

Model Graduation
(mm)
Measuring  Range
(mm)
Accuracy
(µm)
Parallelism
(µm)
Dial Reading Measuring  Force
(N)
Contact Point Form
(mm)
Anvil Form
(mm)
Weight
(g)
SM-114 0.01 10 ±15 5 0-50-100 2.5 or less φ 10 Flat φ 10 Flat 270
SM-114LS 0.01 10 ±15 - 0-50-100 2.5 or less φ 3.2 Ball φ 10 Flat 270
SM-114LW 0.01 10 ±15 - 0-50-100 2.5 or less φ 3.2 Ball φ 3.2 Ball 270
SM-114P 0.01 10 ±15 5 0-0.5-1 2.5 or less φ 10 Flat φ 10 Flat 270
SM-124 0.01 20 ±20 5 0-50-100 3.5 or less φ 10 Flat φ 10 Flat 270
SM-124LS 0.01 20 ±20 - 0-50-100 3.5 or less φ 3.2 Ball φ 10 Flat 270
SM-124LW 0.01 20 ±20 - 0-50-100 3.5 or less φ 3.2 Ball φ 3.2 Ball 270
SM-125 0.01 20 ±20 5 0-50-100 3.5 or less φ 10 Flat φ 10 Flat 440
SM-125LS 0.01 20 ±20 - 0-50-100 3.5 or less φ 3.2 Ball φ 10 Flat 440
SM-125LW 0.01 20 ±20 - 0-50-100 3.5 or less φ 3.2 Ball φ 3.2 Ball 440

Đồng hồ đo độ dày vật liệu SM-114 Teclock

CÔNG TY TNHH TM và DV TĂNG MINH PHÁT

  Trụ sở:    119 Quốc Hương,  Phường Thảo  Điền,  Q.2,  Tp.HCM

  VPGD:    602/41E, Điện Biên Phủ, P.22, Q.Bình Thạnh, Tp.HCM

  Ðiện Thoại:   (028) 35121007                 Fax:  (028) 35121008

 Mr.Thân: sale06@tmpvietnam.com      Phone: 0911 175 069

  VP tại Đức: Am Boscheler Berg 4a 52134 Herzogenrath

Chính sách mua hàng

   Giao hàng miễn phí.

   Làm việc các ngày trong tuần.

   Thanh toán linh động.

    Bảo hành 12 tháng.

    Hỗ trợ lắp đặt, vận hành.

Bản đồ TMP

© 2017 Tudonghoatmp.com, all right reserved.

Thiết kế website www.webso.vn

Loading...

Back To Top
UA-121981515-1