.png){kind=small}
.png){kind=small}
.png){kind=small}
Belt Conveyor Emergency-stop Switch
Reset system
: Self-reset
: Manual-reset
Required force of pull cord 49±9.8N(5 ± 1kgf)
Pull Cord Switch is an emergency switch to stop the belt conveyor instantly when an accident happens. Since the Pull Cord Switch is so designed that it should be installed at the side of belt conveyor and the pull cord should be mounted along conveyor, the switch can be actuated at any position. According to the Industrial Safety ＆ Health Regulations, it has been assigned to install the Pull Cord Switch to belt conveyor in Japan.
| PULL CORD SWITCH | ELAW-21 |
| PULL CORD SWITCH | ELAW-31 |
| PULL CORD SWITCH | ELAW-61P |
| PULL CORD SWITCH | ELAM-21W |
| PULL CORD SWITCH | ELAM-61W |
| PULL CORD SWITCH | ELADP-22W |
| PULL CORD SWITCH | ELADP-32W |
| PULL CORD SWITCH | ELAM-62PW |
Công tắc dật dây bảo vệ băng tải Elaw 31 / Elaw 61 Matsushima
Danh mục hãng- AT2E
- Baumuller
- Bircher
- BCS Italy
- Bernard Control
- Beckhoff
- Beijer
- CS Instruments
- CEIA
- DECA WELD
- Elau Schneider
- Fireye
- Finetek
- Gastron
- IBA
- Insert Deal
- Knick
- Koganei
- Keofitt
- Keller - Its
- Kiepe Elektrik
- Kometer Flowmeter
- Lapar Valve
- Mark - 10
- Matsushima
- Minimax
- Nireco
- Ohkura
- Pavone Sistemi
- Pora
- Red lion
- Riels
- SOR
- Staubli
- TDK Lambda
- Teclock
- Vega
- YTC (Young Tech)
- Wago
- FOX THERMAL
- ORBINOX
- Clyde Pneumatic Conveying
- KREBS - RIEDEL
- PCI Instrument
- CEMB
- BARKSDALE
- INTORQ
- SITEC
- Spohn Burkhardt
- Emerson
- KSR KUEBLER
- Dosatec SA
- Thwing-Albert
- OKAZAKI
- TEK TROL
- NAGANO KEIKI
- Danh mục khác
Hỗ trợ trực tuyến
Liên hệ tư vấn mua hàng
Thống kê truy cập
-
Trực tuyến:4
-
Hôm nay:1325
-
Tuần này:7899
-
Tháng trước:15064
-
Tất cả:1879379
Video Clip
Giao hàng miễn phí.
Thanh toán linh động.
Bảo hành 12 tháng..png)