Ngõ vào Analog 750-630-000-006 Wago - Transmitter interface 750-630-000-006 Wago

Xuất xứ:

Germany

Tình trạng:

Mới 100%

Bảo hành:

12 tháng

Mô tả:

Phân phối Wago tại VietNam

Chia sẻ:

Số lượng

Chi tiết sản phẩm

Item no. 750-630/000-006

SSI transmitter interface; Fail-safe 2 channel analog input; 250 kHz; Gray code

(Đầu vào Analog 750-630/000-006 Wago, Đại lý phân phối thiết bị Wago tại Vietnam)

Description

This module is an SSI interface for the direct connection to an SSI transmitter.

After the interface has given a clock pulse to the sensor, the interface reads the incoming data and transmits it directly in the form of a data word into the process image of the PLC or PC. It is possible to factory adjust different operating modes, transfer frequencies and bit widths by means of the control register.

The power supply for the transmitter is derived internally from the power jumper contacts.

Technical Data

Type of signal	differential signal (RS 422)
Sensor connection	In + D, -D / Out + CI, - CI
Versorgungsspannung Geber	DC 24 V; via power jumper contacts
serial input	32 bits (bit width)
Data transmission rate	125 kHz
Bit width	1 x 32 bits 1 x 8 bits control/status (option) (24 bits data, 8 bits reserved)
Code	Graycode
Field supply voltage	DC 24 V (-15 … 20 %); über Leistungskontakte; zur Weiterleitung getunnelt
System supply voltage	DC 5 V; via data contacts
Current consumption, system supply (5 V)	20 mA
Isolation	500 V system/supply
Number of incoming power jumper contacts	2
Number of outgoing power jumper contacts	2