- Compact and inexpensive.
- Excellent control accuracy (control within ±0.1mm according to installation conditions).
- No contact between sensor and web.
- Very easy installation and maintenance.
- Large operating force and high sensitivity and accuracy.
- All hydraulic devices are incorporated in the oil reservoir, thus eliminating oil leakage.
- Quiet operation due to the special construction that prevents noise emission
(Operating noise level : below 65 dB (A)).
- Use of a long-Iife and easy-to-maintain non-contact rotary blower allows clean air to be supplied.
- Use of a general-purpose motor makes all models explosion proof and increases safety.
AC〔AUTO-CENT〕REMOTE AUTO / CENT SWITCHING MODE
This system is available with centering operation as well asautomatic operation. The reel or the guide roll stand is automatically restored to the center position by selecting CENT with the selector switch when setting a mill roll, changing the width of a wed, or splicing webs.
AM〔AUTO-MAN〕REMOTE AUTO / MAN SWITCHING MODE
In this system, the Servoguide MK-IV. D controller can be remotely switched off during automatic operation or the reel stand can be moved right and left, when setting a mill roll or splicing webs.
|MODEL||Type||Max operating pressure
|Pump type||Motor Output
|Max. operating force kN
Cylinder bore mm
|Max. operating speed
with no load mm/s
Cylinder bore mm
Servo guide Nireco - Bộ nguồn thuỷ lực Nireco
- AT2E VietNam
- Baumuller VietNam
- Bircher VietNam
- Beckhoff VietNam
- Bussmann VietNam
- Elco Holding VietNam
- IBA VietNam
- Koso Vietnam
- Keller - its
- Mark-10 Vietnam
- Matsushima VietNam
- Nireco VietNam
- Ohkura VietNam
- Pavone sistemi
- Red lion VietNam
- Teclock Vietnam
- Wise VietNam
- Danh mục khác