Bộ điều khiển động cơ servo BM2405, BM2410, BM2415 Baumuller

4Q controller for BLDC motors

• Supply voltage Up: 9...60 V DC
• Supply voltage electronics Ue: 9...30 V DC
• Maximum output voltage Umax: 100% Up
• PWM frequency / resolution: 25 kHz, 16 Bit
• Min. terminal inductance: 200 x 10-6H
• Current controller cycle time (CURR): 125 x 10^-6s
• Speed controller cycle time (SVEL): 250 x 10^-6s
• Position controller cycle time: 2000 x 10^-6s
• Protective function of controller: overvoltage and low voltage monitoring, overtemperature monitoring
• LED displays: Power, Status, Error
• Humidity (non-condensing): 20…80%
• Ambient temperature: 0…+70 °C
• Protection class: IP20

Rotary encoder input

• Supply voltage on board: 5 V
• Number of single ended / differential inputs: 0 / 6 (b maXX 2405: 3 / 0)
• Input circuitry / encoder signal: open collector / square wave
• Signal voltage: 5…24 V (b maXX 2405: 5 V)
• Frequency per signal: 500 kHz (b maXX 2405: 100 kHz)

Commutation transmitter input

• Supply voltage on board: 5 V
• Number of single ended / differential inputs: 0 / 6 (b maXX 2405: 3 / 0)
• Input circuitry / encoder signal: open collector / square wave
• Signal voltage: 5…24 V (b maXX 2405: 5 V)
• Frequency per signal: 50 kHz (b maXX 2405: 10 kHz)

MPU

• Programming language: Python Script
• Number of freely programmable lines: 1500

Din

• Number of digital inputs: 6 // 2 (b maXX 2405: 3)
• Switching threshold low / high:  -30…5 / 7…30 // 0…5 / 7…30 V DC (b maXX 2405: -30…5 / 7…30 V DC)
• Input impedance: 5 // 4.7 kOhm (b maXX 2405: 5 kOhm)
• Filter: 30 x 10^-6s (b maXX 2405 only)

Dout

• Number of digital outputs: 2 (b maXX 2405: 1)
• Signal type: positive switching / short-circuit proof
• Load: ohmic / inductive
• Continuous output current I_N: 2.5 A

Ain

• Number of analog single ended / differential inputs: 1 / 1 (b maXX 2405: 1 / 0)
• Resolution: 12 Bit
• Signal level: ±10 V
• Input impedance: 20 kOhm (b maXX 2405 only)

Fieldbuses

CANopen (onboard)

• Type / protocol / device profile:  Slave / DS301 / DS402
• Max. baud rate: 1 Mbit/s
• CAN Specification  2.0B
• Isolated:  no

EtherCAT (option)

• Type / protocol: Slave / CoE (CANopen over EtherCAT)
• max. Baudrate: 100 Mbit/s
• Physikal Layer / Bus Controller: 100 Base-Tx EtherCAT / ET1100
• Number of ports  2 x RJ45 (In, Out)

PROFIBUS-DP (option)

• Type / protocol / device profile: Slave / DPV0, DPV1 / PROFIdrive
• Max. baud rate: 12 Mbit/s
• Physikal Layer / Bus Controller: EIA-485 / VPC
• Integrated bus termination: no

Modbus (option)

• Type: Slave
• Max. baud rate: 9.6 Mbit/s
• Transmission mode: RTU (Remote Terminal Unit) mode
• Integrated bus termination: no

Công ty TNHH Thương Mại Và Dịch Vụ Tăng Minh Phát (TMP) là nhà phân phối thiết bị hãng Baumuller tại Vietnam.

Chúng tôi cam kết cung cấp hàng hoá mới chất lượng đúng quy cách yêu cầu, CO – CQ thiết bị đầy đủ.

Hãy liên hệ để chúng tôi có thể hỗ trợ bạn tốt nhất.

Bộ điều khiển động cơ servo BM2405, BM2410, BM2415 Baumuller