Đồng hồ đo áp suất có màng P710/ P720/ P730 Wise Control

Xuất xứ:
Korea
Tình trạng:
Mới 100%
Bảo hành:
12 tháng
Chia sẻ:
Số lượng
Yêu cầu gọi lại
số điện thoại

Service intended

Diaphragm seal type gauges are suitable for the situation where the process medium would corrode the instrument connection and pressure sensing element. Furthermore, this type of gauge is highly recommended in a situation where the process medium contains suspended solids, or if it is sufficiently viscous to clog the instrument connection and pressure sensing element. Additionally, it is recommended to be used where the process medium might freeze or solidify the instrument connection and pressure sending element due to the ambient or process temperature change, and where the process medium requires the flushing from the system to prevent any contamination.

Design Internal diaphragm
Accuracy Refer to gauge model
Suitable pressure range (MPa, kPa,  bar) -0.1 ~ 0 to -0.1 ~ 2.5 MPa
0 ~ 0.1 to 0 ~ 35 MPa
Filling liquid Silicone oil
Working temperature Ambient : -20 ~ 65 °C
Fluid : Max. 100 °C
Diaphragm material Diaphragms are available in many corrosion resistant materials. Compatibility of selected material and process fluid is the responsibility of user.
Temperature effect Accuracy at temperature above and below the reference temperature (20 ℃) will be effected by approximately
±0.5 % per 10 ℃ of full scale

Standard features

Process connection Model P710 : PT, NPT and others feasible
Model P720, P730 : Flanges to ANSI, JIS or other standard
Upper flange (Gauge side) Stainless steel (304SS, 316SS, Titanium)
Diaphragm 316L SS, Monel, Hastelloy-C Titanium, Tantalum, Nickel, Alloy20
Under flange (Process side) Stainless steel (304SS, 304L SS, 316SS, 316L SS) Monel, Hastelloy-C, Titanium, Nickel
Certificates ATEX Ex II GD c IIC TX
Option ■ Diaphragm and under flange are available in PTFE coating or PTFE lining (★See note)
■ Under flange (Process side) are available in purging plug or heating/cooling jacket

Download: PDF file

Đồng hồ đo áp suất có màng P710/ P720/ P730 Wise Control

CÔNG TY TNHH TM và DV TĂNG MINH PHÁT

  Trụ sở:    119 Quốc Hương,  Phường Thảo  Điền,  Q.2,  Tp.HCM

  VPGD:    602/41E, Điện Biên Phủ, P.22, Q.Bình Thạnh, Tp.HCM

  Ðiện Thoại:   (028) 35121007                 Fax:  (028) 35121008

 Mr.Thân: sale06@tmpvietnam.com      Phone: 0911 175 069

  VP tại Đức: Am Boscheler Berg 4a 52134 Herzogenrath

Chính sách mua hàng

   Giao hàng miễn phí.

   Làm việc các ngày trong tuần.

   Thanh toán linh động.

    Bảo hành 12 tháng.

    Hỗ trợ lắp đặt, vận hành.

Bản đồ TMP

© 2017 Tudonghoatmp.com, all right reserved.

Thiết kế website www.webso.vn

Loading...

Back To Top