Tema Vasconi Vietnam - Đại lý phân phối đồng hồ áp suất, nhiệt độ hãng Tema Vasconi tại Vietnam

Chia sẻ:

Số lượng

Chi tiết sản phẩm

TMP cung cấp các sản phẩm hãng Tema Vasconi tại Vietnam

- Đồng hồ đo áp suất, Đồng hồ đo áp suất có màng, Công tắc áp suất, Cảm biến áp suất, Đồng hồ đo chênh áp,

- Đồng hồ đo nhiệt độ, Đồng hồ đo nhiệt độ có dây, Đồng hồ đo nhiệt độ mặt xoay góc 90o,

- Cảm biến nhiệt độ Tema,

- Can nhiệt, RTD,

- Đồng hồ / Thiết bị đo lưu lượng,

1	MBS860 series	MBS861	Mounting: direct, lower connection type 861	The pressure gauges series MBS860, with or without filling fluid, may be installed on every chemical, petrochemical plants, to prevent accidents according to normative EN837-1/ S3 and ANSI B40.1.1 Diameters: 100-150 mm
		MBS864	Mounting: direct, back connection type 864
		MBS867	Mounting: panel front flange rear connection type 867
2	MB800 series	Type 801	Direct mounting, radial connection	The pressure gauges series MB800, with or without filling fluid, may be installed on every chemical, petrochemical plants, onshore and offshore applications and machinery, food and pharmaceutical industry. Construction according to EN 837-1 Diameters: 63-80-100-125-150-200 mm
		Type 802	Direct mounting, rear central connection
		Type 804	Direct mounting, rear eccentric connection
		Type 805	Wall mounting with rear flange, radial connection
		Type 807	Panel mounting, 3 hole front flange, rear eccentric connection
3	MBP800 series	Type MBP801	Direct mounting, radial connection	The pressure gauges series MBP800, with or without filling fluid, may be installed on every chemical, petrochemical plants with particularly aggressive environment, to prevent accidents according to normative EN837-1/9.7.2 and ANSI B40.1.1 Diameters: 4 ½”
4	MM900 series	Type 901/A	Range: 0/25÷60mbar	In the pressure gauges series MM900, the sensing element is a diaphragm with concentric corrugations actuating the amplifying mechanism through a pivot. Designed for the measurement of pressure, vacuum of viscous fluids, crystallizing or polluted process fluids. These instruments are more reliable ane easy to protect against overpressure than the Bourdon tube type according to EN837-3 Diameters: 100-150 mm
		Type 901/B	Range: 0/100÷400mbar
		Type 901	Range: 0/0.6÷25bar
5	MS1000 series	Type 1001	Direct mounting, radial connection	Realized for use in low pressure with gas or non crystallizing liquids according to EN837-3 Diameters: 100-150 200mm
		Type 1004	Direct mounting, rear eccentric connection
		Type 1007	Panel mounting, 3 hole front flange, rear eccentric connection
6	MC1100 series	Type 1101	Direct mounting, radial connection	Realized for use in low pressure with gas or non crystallizing liquids according to EN837-3
		Type 1102	Direct mounting, central rear connection
		Type 1105	Panel, with bracket and central rear connection type 1105
7	MDM1200 series	Type 1205	Surface mounting with back bracket	The differential pressure gauges series MDM1200, with or without filling fluid, are simple and suitable to be installed in presence of low static pressure on every chemical, petrochemical plants, onshore and offshore applications and machinery, food and pharmaceutical industry Diameters: 150 mm (100mm as option)
		Type 1207	Panel mounting, 3 hole front flange
8	MDS1200 series	Type 1205	Surface mounting with back bracket	The differential pressure gauges series MDS1200, with or without filling fluid, are simple and suitable to be installed in presence of low static pressure on every chemical petrochemical plants, onshore and offshore applications and machinery, food and pharmaceutical industry Diameters: 150 mm (100mm as option)
		Type 1207	Panel mounting, 3 hole front flange
9	MDB1200 series	Type 1201	Direct mounting, radial connections	The differential pressure gauges series MDB1200, with or without filling fluid, are simple and suitable to be installed in presence of low static pressure on every chemical, petrochemical plants, onshore and offshore applications and machinery, food and pharmaceutical industry Diameters: 100 m
		Type 1205	Wall mounting with rear flange, radial connections
		Type 1207	Panel mounting, 3 hole front flange ,radial connections
10	MDC1200 series	Type 1205	Surface mounting , rear flange lower connection	The differential pressure gauges series MDC1200, are simple and suitable to be installed to measure air or clean gases in presence of low static pressure on every chemical, petrochemical plants, onshore and offshore applications and machinery, food and pharmaceutical industry Diameters: 150 mm
		Type 1207	Panel mounting, front flange eccentric rear connection
11	MDP200 series	Type 201	in line direct mounting	The differential pressure gauges series MDP200, with or without electric contact, are simple and suitable to be installed in all the applications where is necessary an indication or alarm of differential pressure at low cost. Diameters: 50-63-80-100-115-150 mm (2",2.5",3.5",4",4.5",6"
		Type 207	Panel mounting, 3 hole front flange
12	TEST GAUGES Cl. 0,25%	Type 801CA	Direct mounting, radial connection	Designed to be used in laboratory fer tests or calibrations and on all the plants where reliability and accuracy are important . Diameters: 150 mm
		Type 808CA	Panel mounting, 3 hole front flange, rear central connection
		Type 810CA	Panel mounting, “U” type rear bracket, rear eccentric connection
		Type 807CA	Panel mounting, 3 hole front flange, rear eccentric connection
13	TEST GAUGES Cl. 0,1	Type 801CA	Direct mounting, radial connection	Designed to be used in laboratory fer tests or calibrations and on all the plants where reliability and accuracy are important . Diameters: 250 mm
		Type 807CA	Panel mounting, 3 hole front flange, rear eccentric connection
14	MB100 series	Type 101	Direct mounting, radial connection	The pressure gauges series MB100, with or without filling fluid, are suitable for all the industrial application on non corrosive fluids for the copper alloy . Diameters: 50-63-80-100 mm
		Type 102	Direct mounting, rear central connection
		Type 104	Direct mounting, rear eccentric connection
		Type 105	Wall mounting with rear flange, radial connection
		Type 107	Panel mounting, 3 hole front flange, rear eccentric connection
		Type 108	Panel mounting, 3 hole front flange, rear central connection
		Type 110	Panel mounting, “U” type rear bracket, rear eccentric connection
15	MB400 series	Type 401	96x96 e 144x144	The pressure gauges series MB400 in rectangular or squared enclosure have an accurate construction and standardized dimensions for mounting in parallel with electric instrumentation in centralized control rooms Diameters: 144x144 - 144x72 – 96x96mm DIN43700 (Option 72x72)
		Type 403	144x72 (single element)
		Type 403/2	144x72 double element)
		Type 402	96x96 e (for filling)
16	MV600 series	The pressure gauges series MV600 are manufactured in 3 versions - type MV601, differential, armoured, with high resistance tempered glass tubes - type MV602, differential, with calibrated glass tubes - type MV603, glass tube pressure gauges for accurate measurements Mounting : vertical

No.	Type	Description		Note
1	GTMP series	ORIFICE FLANGE UNIONS FOR FLOW MEASUREMENT	Types: slip-on flanges (SO), - fig. 1 welding neck flanges, (WN), - fig.2 ring type joint welding neck flanges (WN RJ), - fig. 3 piezometer ring etc. Materials: carbon steel, stainless steel, alloy steel, moplen etc. Dimensions: Series ANSI 300,600, 900, 1500; from PN 6 forward	The calibrated orifice flange is the most simple and economic methode for a flow measurement of liquids or gases It can be supplied with SMART electronic differential pressure transmitter, out-put 4-20mA, of three-way manifolds and of the temperature sensor type PT100 for compensated gas flow measurement.
2	PTO series	PADDLE TYPE ORIFICE FLANGES PLATES	Types: - concentric with sharp edge - fig. 1 - 45° bevel - fig. 1 - eccentric type - fig. 2 - segmental type - fig. 3 - quarter-circle - fig. 4 - ring joint (see table 1) - fig. 5 - conical entrance - etc Orifice plate materials: standard AISI 316 stainless steel; monel; hastelloy; moplen etc. Ring materials: ARMCO steel for carbon steel flanges; AISI 316 stainless steel for stainless steel union flanges. Other materials when required.
3	DTF series	PRECISION FLOWMETER ACCURACY 0.5%	It can be supplied with SMART electronic transmitter, output 4-20mA, and three-way manifolds. Process connection flanged or thread. Standard material st. st. AISI316
4	PT series	PITOT TUBES	The magnitude factor of Pitot Venturi depend on the position of calibrating ring. When required and extra price, flow calculation can be made for determining the «dp». In this case specify: - fluid: type and medium condition - maximum and average flow - working and base temperature - working, barometric and base pressure - specific gravity - absolute viscosity in centipois at working conditions - inside and outside size of pipe diameter - range and type of flow meter (dry type. mercury type etc.)
5	CVT series	VENTURI TUBE	Types: - non truncated, long type - fig. 1 - truncated, short type - Conical divergent outlet truncated at 65% - fig. 2 - standard - fig. 5 - welding-in insert type - fig. 3 - one piece type - fig. 4 Materials: to specify time by time. Dimensions: from 2" forward
6	LRF series	LONG-RADIUS FLOW NOZZLES	Types: - flanged type: manufactured in all dimensions - welding-in type with holding-ring: for size 4” forward - fig. 4 - welding-in type without holding-ring: for size from 1 ½” to 3” - fig. 3 - high "beta" type: with β from 0,25 to 0,80 - fig. 1 - low “beta” type: with β from 0,20 to 0,50 - fig. 2 Materials: - flow nozzle: from forged piece - holding ring: in the same material of <<flow section» - pins: from bar-stock AISI 316 Dimensions: flow nozzle: all dimensions flow section: maximum length: 100".
7	ICC series	INSTRUMENTS SEAL POTS, CONDENSING CHAMBERS AND INSTRUMENT AIR FEED HEADERS	Types: - instrument seal pots - condensing chambers - instrument air feed headers Material: Carbon steel, stainless steel, alloy steel Dimensions: Ø 1 ½”, 3”, 4” e 6” sch. 40, 80, 160, XXS
Gas-Filled and Bimetal Thermometers
Gas-Filled and Bimetal Thermometers
No.	Type	Description		Note
1	TB900 series	Type 914		Installed on every chemical, petrochemical plants, onshore and offshore applications, machinery, food and pharmaceutical industry Diameters: 80-100-130-150 mm (3-4-5-6”)
		Type 910
		Type 911
2	TM800 series	Type 801	Direct, radial lower stem	Installed on every chemical, petrochemical plants, onshore and offshore applications and machinery, food and pharmaceutical industry Diameters: 63-80-100-125-150-200 mm
		Type 802	Direct, radial stem at 45°
		Type 803	Direct, rear stem
		Type 804	Direct, radial stem at 90°
		Type 809	Direct, lower adjustable stem
		Type 805	Wall, rear flange remote mounting
		Type 806	Bracket for wall mounting , remote
		Type 807	Panel, front flange rear central stem
		Type 808	Wall, rear flange rear central stem
		Type 810	Panel, “U” clamp, rear eccentric stem
3	TM700 series	Type 701/S		Be suitable to be installed on engine, machines, or plants in presence of strong vibrations Diameters: 100 mm
3	TM700 series	Type 701/M
4	TM400 series	Type 401	Dimensions 144x144	Be specific for panel mounting with standard case dimensions suitable for mounting in parallel with electric indicators Diameters: 144x144 ; 144x72 ; 96x96 mm
		Type 401	Dimensions 96x96
		Type 402	Dimensions 96x96
		Type 403	Dimensions 144x72
5	TV1000 series	Type 1002/ V	250x55	Be particularly indicated for those industrial applications (petrochemical, air conditioning, food industry, chemical, etc. ) where there are difficulties of location Dimensions : : type 1001/V 180x55 mm type 1002/V 250x55 mm
5	TV1000 series	Type 1001/ V	180x55
6	TV1006 series	Type 1006/A		Be manufactured with ranges and relatives divisions of graduation according to the nominal dimensions Dimensions : 110x30 ; 150x30 ; 200x30 mm
		Type 1006/B
		Type 1006/C
		Type 1006/D
		Type 1006/E
		Type 1006/F
		Type 1006/G
7	TV1009 series	TECHNICAL CHARACTERISTICS Body : glass Thermometric capillary : glass with prismatic section Graduation : internal on white glass Ranges : see table Stem lenght : to be defined		Be particularly indicated for use in laboratory or where is required high reading accuracy .
8	Type TS8-1	BASE THERMO-SENSOR INSERT for RTD or Thermocouple		APPLICATIONS • With threaded, weldable or flange-mounted thermowells • Mounting on pipes and open or closed vessels • For a wide range of media: vapours, gases, liquids, non-abrasive substances
9	Type TS8-2	CERAMIC THERMO-SENSOR INSERT con Thermocouple E/J/K/N		APPLICATIONS • Replacement insets for mounting in the steel or ceramic thermowells • Industrial ovens (heat treatment, incineration) • Chimneys (combustion gases) • Fusion baths for metal and glass
10	Type TS8-3	CERAMIC THERMOMETRIC INSERT with thermocouple S/R/B		APPLICATIONS • Replacement inserts for mounting in the ceramic thermowells of type TS8-41 probes • Industrial ovens (heat treatment, incineration) • Chimneys (combustion gases) • Fusion baths for metal and glass
11	TYPE CT8-21	THERMOMETRIC COMPLEX with thermowell, at high response speed		APPLICATIONS • For all temperature measurements requiring short response time • Mounting on pipes, and open or closed vessels • For a wide range of media: vapours, gases, liquids, non-abrasive substances
12	TYPE CT8-22	THERMOMETRIC COMPLEX with stepped end, high response speed		APPLICATIONS • For all temperature measurements requiring very short response time (stepped end) • Mounting on pipes, and open or closed vessels • For a wide range of media: vapours, gases, liquids, non-abrasive substances
13	TYPE TS8-40	THERMOCOUPLE FOR HIGH TEMPERATURE		APPLICATIONS • Industrial ovens (heat treatment, incineration) • Chimneys (combustion gases) • Fusion baths for metal and glass
14	TYPE TS8-41	THERMOCOUPLE FOR HIGH TEMPERATURE with ceramic thermowell		APPLICATIONS • Industrial ovens (heat treatment, incineration) • Chimneys (combustion gases) • Fusion baths for metal and glass
15	TYPE CT8-70	THERMOMETRIC COMPLEX FOR SKIN MEASUREMENT		APPLICATIONS • Surface temperature measurement on steam pipes, inside or outside vessels and reactors • Temperature measurement on walls or flat surfaces
16	TYPE CTB	THERMOMETRIC COMPLEX with barstock thermowell acc. to UNI/DIN and ISA		APPLICATIONS • For medium pressures, fluid speeds and temperatures • With tapered thermowells and lag extensions • Mounting on pipes, and open or closed vessels • For a wide range of media: vapours, gases, liquids, non-abrasive substances
17	TYPE CTL	THERMOMETRIC COMPLEX WITHOUT THERMOWELL		APPLICATIONS • For mounting on pipes, vessels, etc. already fitted with thermowells • The bore diameter of the thermowell should be 0.5 to 1 mm greater than that of the inset diameter; bore depth and connections shall comply with ISA-dS 49 standard.
18	TYPE CTT	THERMOMETRIC COMPLEX with thermowell from pipe,		APPLICATIONS • For medium pressures, fluid speeds and temperatures • Where screwed thermowells (flange mounting optional)are required • Mounting on pipes, and open or closed vessels • For a wide range of media: vapours, gases, liquids, non-abrasive substances
19	TYPE CT8-81	THERMOMETRIC COMPLEX FAST RESPONSE “RTD”		APPLICATIONS • Flexible, small size probes for machines, chemical plant, etc. • For low-pressure, low-speed fluids and measurements requiring short response time • For a wide range of media: vapours, gases, liquids and nonabrasive substances, provided that these are compatible with the sheath material • May also be fixed on solid surfaces or inserted into cavities • Special executions for explosive environments
20	TYPE TS8-81	FAST RESPONSE THERMOMETRIC COMPLEX “TC” WITH CONNECTOR		APPLICATIONS • Flexible, small size probes for machines, chemical plant, etc. • For low-pressure, low-speed fluids and measurements requiring short response time • For a wide range of media: vapours, gases, liquids and nonabrasive substances, provided that these are compatible with the sheath material • May also be fixed on solid surfaces or inserted into cavities • Special executions for explosive environments only for Intrinsecally afe circuits

No.	Type	Model	Description
1	DPMS8 series	Weatherproof Differential Pressure Switches
2	PBS8 series	Bourdon Tube Type Weatherproof Pressure Switches
3	PCS8 series	Capsule Type Weatherproof Pressure Switches
4	PMS8.1 series	Diaphragm Type Weatherproof Pressure Switches
5	PMS8.2 series	Weatherproof Low Range Pressure Switches
6	TMS8 series	Gas Exphansion Type Weatherproof Temperature Switches
Electric Contacts for Pressure and Temperature gauges, Trasmitters and electronic instrumentation
No.	Type	Model	Description
1	Electric Alarm Contacts	Types Of Contacts
		Low Action Contacts	Nominal operating voltage: 250 V max. Starting and breaking current: 0,7 A max. Permanent current: 0,6A max Breaking capacity : 10 W 18 VA max. Switching precision: approx. 0,5% of final scale value. Contact material: Ag80 / Ni20 (other material upon request)
		Inductive Contacts	Rated voltage: 8 V = (Ri ~ 1KOhm). Operating voltage: 5 ~ 25V Current consumption: ≥3mA (active face free) ≤1mA (active face covered). Switching precision: approx. 0,5% of final scale value.
		Snap-Action Contacts (With Screwed-In Magnets)	Nominal operating voltage: 250V max. Starting and breaking current: 1,0A max. Permanent current: 0,6A max. Breaking capacity: 30W, 50VA max. Contact material: Ag80/Ni20 (other material upon request). Switching precision: approx. 2-5% of final scale value
		Electronic Contacts
2	Indicating - Dial, Pressure And Temprature Switch	STANDARD SPECIFICATIONS Stops: to 10% and 75% of full scale. Differential: fixed 1/20 of full scale ±10%. Settings: by means of permanent knob through the dial, on request a removable key type knob (specify CH). Protection class: IP44, option IP55
3	MB800 series