Đồng hồ đo chênh áp P880 Wise Control - Wise Vietnam

Xuất xứ:
Korea
Tình trạng:
Mới 100%
Bảo hành:
12 tháng
Mô tả:
Đại lý Wise control Vietnam - TMP Vietnam
Chia sẻ:
Số lượng
Yêu cầu gọi lại
số điện thoại

Service intended

This gauge is used to measure a pressure of air and gas duct, furnace draft, negative pressure room, also, a differential pressure of filter, venturi tube and etc. This gauge have a high quality, low cost, good appearance and wide scale range.

Nominal diameter 100 mm
Accuracy ±2.0 % of full scale
-5 ~ 5, -25 ~ 25 and 0 ~ 10 mm : ±3.0 % of full scale
0 ~ 3000 mm : ±4.0 % of full scale
Scale range (kPa) -0.25 to 0.25 kPa, 0~50 kPa
Working pressure • Steady pressure : 75 % of full scale
• Over pressure protection : 100 kPa
Working temperature Ambient : -10 ~ 60°C
Temperature effect Accuracy at temperature above and below the reference temperature (20 ℃) will be effected by approximately
±1.0 % per 10 ℃ of full scale

Standard features:

Pressure connection ⅛" NPT(F)
Case and cover Gray painted aluminium die casting
Window Acrylic resin
Element (Wetted parts) Silicone rubber
Dial White aluminium with black graduations
Pointer Black painted aluminium alloy

Download: PDF file

Đồng hồ đo chênh áp P880 Wise Control - Wise Vietnam

Hỗ trợ trực tuyến
Liên hệ tư vấn mua hàng
Thống kê truy cập
  • Trực tuyến:
    2
  • Hôm nay:
    826
  • Tuần này:
    3047
  • Tháng trước:
    11745
  • Tất cả:
    1635556
Video Clip
CÔNG TY TNHH TM và DV TĂNG MINH PHÁT

  Trụ sở:    119 Quốc Hương,  Phường Thảo  Điền,  Q.2,  Tp.HCM

  VPGD: số 1 đường 27, P. Hiệp Bình Chánh, Q. Thủ Đức, Tp.HCM

  Ðiện Thoại:   (028) 35121007                 Fax:  (028) 35121008

  Mr.Tiến : sale06@tmpvietnam.com      Phone: 0388 830 881

  VP tại Đức: Am Boscheler Berg 4a 52134 Herzogenrath

Chính sách mua hàng

  Giao hàng miễn phí.

  Làm việc các ngày trong tuần.

  Thanh toán linh động.

  Bảo hành 12 tháng.

  Hỗ trợ lắp đặt, vận hành.

Bản đồ TMP

© 2017 Tudonghoatmp.com, all right reserved.

Thiết kế website www.webso.vn

Loading...

Back To Top